SNGX12/19 Face Milling
Improved by Achteck, SNGX/SNMX series items with double-side 8 cutting edges are economic inserts. It has extensive application for steel and cast iron roughing, semi-finishing and finishing. In addition, improved cutters have three types of approaching angle-45°, 75° and88° and have three types of pitches-sparsh pitch, medium pitch and fine pitch. With all these merits it will bring you low power consumption, low cutting force machining and get best surface quality.
SNGX/SNMX Cutter Introduction
AFM45/75/88-SN Series Milling- General, Economic, Efficient
Cutter Structure Features
Diameter range: 50-250mm
Wide application: enter angle 45°,75°, 88°;
High economy: negative insert with 8 cutting edges
Extensive application: coarse pitch,medium pitch and close pitch.
work piece material: P、K、M、S
Shining Nickel-plated cutter has well corrosion resistance and wear resistance
Dia. Up to φ125 (includes) are coolant types
For roughing and semi-finishing
Insert Features
Negative, double side with 8 cutting edges, economy.
Sharp cutting edge makes cutting lightly.
It has extensive application for steel and cast iron roughing, semi-finishing and finishing.
Coating Introduction
Multi-layer coating structure with perfect toughness;
Good wear resistance and high temperature oxidation resistance
Smooth coating surface enhances work piece surface finish;
Well combination between coating layer and substrate extended tool life.
Alternate soft and hard nano-coating layer structure has high hardness and good toughness;
Good high temperature resistance and oxidation resistance
Smooth coating surface enhances work piece surface finish;
Well combination between coating layer and substrate extended tool life.
Insert Chip Breaker Introduction
RR2→Stable Type
Reliability technology, suitable for casting materials of sand inclusion or sand peel
MR6 → Stable Type
Suitable for unstable cutting conditions with best cutting edge stability; high feedrate
MM4 → General Type
Apply for most types of materials machining under medium cutting conditions.
MM3 → Free-cutting Type
Apply for semi-finishing and finishing under fine cutting conditions with low cutting
force; medium feedrate.