OD Series Multi Function Mill
OD series multi function milling, which has positive insert with 8 edge and full series cutters, are suitable for steels and cast iron facing, ramping and cavity milling.
OD Cutter Introduction
AFM42-OD Face cutter-Light, economic, multi-function
Cutter Structure Features
Double rake angles make cutting gently and slightly
High Economy: 8 cutting edges
work piece material: P、K、M、S
Shining Nickel-plated cutter has well corrosion resistance and wear resistance
Cutter dia. Range from φ40 to φ160, under φ125（include 125）are coolant type
OD04/OD06 two size of insert available
Insert Features
Positive, economic one side insert with 8 cutting edges.
Sharp cutting makes cutting lightly.
It has extensive facing application range for steels and cast iron roughing, semi-finishing and finishing.
Coating Introduction
Multi-layer coating structure with perfect toughness;
Good wear resistance and high temperature oxidation resistance
Smooth coating surface enhances work piece surface finish;
Well combination between coating layer and substrate extended tool life.
Alternate soft and hard nano-coating layer structure has high hardness and good toughness;
Good high temperature resistance and oxidation resistance
Smooth coating surface enhances work piece surface finish;
Well combination between coating layer and substrate extended tool life.
Insert Chip Breaker Introduction
HR2→Stability Type
Suitable for bad cutting condition with stable cutting edge. High feed rate.
MM3→Free-cutting type
Apply for semi-finishing and finishing under fine cutting conditions with low cutting force and medium feed.
FM2→Sharp Type
Specialized geometry design for aluminum machining with low cutting force and sharp edge